Description
Ordering Information
Please note that this product is manufactured upon request – from the date of order it may take up to 28 days to be despatched. This is to give us time to source any required components, assemble and then thoroughly test before shipping.
Introduction
Want to easily add CAN support to your Link equipped Mitsubishi, so you could for example use Link’s excellent CAN Lambda sensor? Excellent. We’ve got you covered here too.
This cable supports all 5 pin Link G4+ and G4X ECU’s, as well as our own 6A1 Interface for Link ECU – Mitsubishi Legnum / Galant VR-4, and reuses the stock Lambda sensor socket for 12V and ground, passing through all 4 wires in case you want to keep the stock sensor.
It then provides CAN Channel 1 (aka CAN1) through a Deutsch DTM 4 way male connector wired up ready to plug straight into Link’s CAN Lambda sensor or other compatible products.
Supported Vehicles
- 1996 to 2003 8th generation Mitsubishi Legnum / Galant VR-4 (6A13TT DOHC)
- 1996 to 2003 8th generation Mitsubishi Galant V6 (6A13 N/A SOHC)
- 1994 to 2000 V6-based Mitsubishi FTO’s (MIVEC and Non-MIVEC)
- 1990 to 1999 Mitsubishi 3000GT / GTO’s with Z15A and Z16A chassis codes
Options
If desired, we can also include the female Deutsch DTM 4 way connector complete with pins so you can wire up your own CAN solution.
We also sell a breakout for the stock lambda sensor socket, this gives you switched 12V, chassis ground, an analog input and sensor ground.
Warranty
All our products are supplied with a 12 month warranty against manufacturing defects only. It is your responsibility to make sure this product is suitable for your requirements and used in accordance with guidelines and local law requirements.
Disclaimer and legal information
This product is designed in-house and is not endorsed by Link/Electronz whatsoever.
This product is not designed for road use and may be illegal in some territories for road use.
Although best effort has been made, the information on this page is not guaranteed to be correct.
