Description
Ordering Information
Please note that this product is manufactured upon request – from the date of order it may take up to 6 weeks to be despatched. This is to give us time to source any required components, assemble and then thoroughly test before shipping.
Introduction
This feature breakout kit provides easy access to all the inputs and outputs on the feature connector of our 6A1 Interface for Link ECU – Mitsubishi Legnum / Galant VR-4 board via high quality Deutsch DTM connectors.
The following Link G4+ / G4X inputs and outputs are broken out when this cable is used:
2 Way Connector
- Sensor 5V Out
- Sensor Ground
4 Way Connector (bonus: pinned to Link ECU’s CAN standards, so you can use this for Lambda sensors, digital dashboards etc)
- Switched 12V
- Chassis Ground
- CAN2 High
- CAN2 Low
6 Way Connector
- Digital In 1
- Digital In 2
- Digital In 3
- Digital In 4
- Digital In 11 (used by ignition switch – useful in case you wanted to implement a turbo timer)
- Analog Temp 3
8 Way Connector
- Analog Volt 5 (used by our e-throttle kit if fitted by the throttle plate motor)
- Analog Volt 6
- Analog Volt 7
- Analog Volt 8
- Analog Volt 9 (potentially used by our e-throttle kit depending on DIP switch settings)
- Analog Volt 10
- Analog Volt 11
- Analog Volt 12 (used by the on-board MAP sensor if fitted, can be disabled if not required)
12 Way Connector
- Ignition Out 4
- Ignition Out 5
- Ignition Out 6
- Auxiliary Out 3 (free for use unless the Link is driving the tacho RPM gauge)
- Auxiliary Out 5 (free only when factory idle stepper isn’t present ie. when our e-throttle kit is fitted)
- Auxiliary Out 6 (free only when factory idle stepper isn’t present ie. when our e-throttle kit is fitted)
- Auxiliary Out 7 (free only when factory idle stepper isn’t present ie. when our e-throttle kit is fitted)
- Auxiliary Out 8 (free only when factory idle stepper isn’t present ie. when our e-throttle kit is fitted)
- Auxiliary Out 9 (used by our e-throttle kit)
- Auxiliary Out 10 (used by our e-throttle kit)
- Permanent 12V
- Chassis Ground
Warranty
All our products are supplied with a 12 month warranty against manufacturing defects only. It is your responsibility to make sure this product is suitable for your requirements and used in accordance with guidelines and local law requirements.
Disclaimer and legal information
This product is designed in-house and is not endorsed by Link/Electronz whatsoever.
This product is not designed for road use and may be illegal in some territories for road use.
Although best effort has been made, the information on this page is not guaranteed to be correct.
